Skip to content
Bulk Fueling

Kerosene for construction heaters on winter jobsites

Winter work keeps going when crews can heat an enclosed floor, cure concrete or dry out a building. Many jobsites do that with portable forced-air or radiant heaters, and keeping them fueled through a cold stretch takes the right fuel, safe setup and a supply plan that does not run dry.

Forced-air kerosene heater warming a wood-framed building under construction on a snowy day, fuel can on a cart nearby

Use the fuel the heater is rated for

Check the heater's manual and data plate before you order. Many construction heaters call for 1-K kerosene, and some multi-fuel models are also rated for diesel, heating oil or other fuels. Only use a fuel the maker lists for that heater.

Do not swap in gasoline or another product to stretch a supply. The wrong fuel can cause smoke, soot, flare-ups or a fire, and it can damage the heater. If the heater is rated for diesel, use the grade the maker calls for.

Ventilation and carbon monoxide

Fuel-burning heaters use oxygen and give off combustion gases, including carbon monoxide. Direct-fired heaters release those gases into the space they heat, so enclosed work areas need enough fresh air, and some sites use indirect-fired heaters that vent outside.

OSHA's construction rules for temporary heating devices require enough fresh air and extra care with ventilation in confined spaces. Many contractors also use carbon monoxide monitors. Follow the heater maker's instructions on clearances and indoor use.

Setup, clearances and refueling

Set heaters level, on a stable base, and away from tarps, insulation, lumber and other combustible material. OSHA calls for at least 10 feet between heaters and nearby tarps or canvas, with the coverings fastened so wind cannot push them into a heater.

Shut a heater down and let it cool before you refuel it unless the maker allows otherwise. Refuel outside the work area when you can, wipe up spills, and keep fuel containers closed and away from the heater and exit paths.

Storing kerosene on the jobsite

Keep kerosene in its own labeled tank, tote or approved container, separate from diesel and gasoline, with its own pump or nozzle. A small aboveground tank near the heaters cuts down on can trips and keeps the supply in one place.

Storage limits, tank placement and spill rules vary by city and site, so check with the local fire marshal and your general contractor's safety plan. Our fuel tank rental guide covers what to ask if you need a temporary tank for the season.

Keep heaters fueled through cold snaps

Heaters can burn through fuel fast in a hard freeze, and kerosene demand jumps the first cold week of the season. Set up a jobsite account early, ask about minimum gallons per delivery, and agree on a fill schedule before the weather turns.

Bulk Fueling's kerosene search shows distributors that list kerosene and cover your ZIP. Request quotes with the grade, the gallons, the container or tank, and the gate hours, and add diesel to the order only when the profile lists both.

Questions

Can I run diesel in a kerosene construction heater?

Only if the heater maker lists diesel as an approved fuel for that model. Many heaters are multi-fuel and many are not, so check the manual or data plate before you fill it with anything other than kerosene.

Is it safe to use a kerosene heater inside a building under construction?

It can be done when the heater is rated for that use, the area has enough fresh air and the maker's instructions are followed. Watch for carbon monoxide, keep clearances, and follow your site safety plan.

Does Bulk Fueling deliver kerosene?

No. Bulk Fueling is a free directory that lists distributors. Search your jobsite ZIP with the kerosene filter, read the profiles that fit, and request quotes from the distributors that serve your area.

Kerosene for construction heaters · Bulk Fueling