Skip to content
Bulk Fueling

Diesel delivery for irrigation pumps

A diesel irrigation engine can run for days at a time through a dry summer, often at a well or pivot miles from the farm shop. Keeping it fueled means planning tank size, access and reorders before the season, not after the pump runs dry at night.

Diesel irrigation pump engine beside a small steel fuel tank at a farm well with a center pivot and corn field behind

Dyed diesel for qualifying farm use

Irrigation engines and pumps that never travel on public roads are a common off-road use, and many farms run them on dyed diesel. Dyed diesel is for off-road use only, so keep it separate from the clear ULSD that farm trucks and pickups use on the road.

Rules on which uses qualify, and on any state forms or permits, are set by the IRS and your state tax agency. If you are not sure about your setup, check with them or a tax professional before you order. Our dyed diesel and clear ULSD guide covers the buyer-side basics.

Sizing the tank at the well

Start with how many gallons the engine burns per hour at its usual load, how many hours it runs in a typical week, and how often a truck can reasonably reach the site. Those three numbers tell you how much storage you need between fills.

A tank that is too small means frequent trips and a higher risk of a run-out during a long set. A tank that is far too big can leave fuel sitting into the off-season. Our guide to sizing an aboveground fuel tank walks through the math and the questions to ask.

Access for the delivery truck

Pivot corners and well sites are often reached by field roads, turn rows or gravel lanes that get soft after rain or flood irrigation. Tell the distributor how to reach each tank, where a truck can turn around, and whether a smaller tank wagon is needed.

Send a map pin for every tank and label them by field or well number. When a farm has a dozen engines spread across several sections, clear names save the driver time and keep fuel from going into the wrong tank.

Keep water and dirt out of the fuel

Tanks that sit in the sun and cool at night can pull in moist air, and condensation can leave water in the bottom of the tank. Water and dirt plug filters and can stop an engine in the middle of a set when nobody is around to restart it.

Check for water regularly, keep fill caps and vents in good shape, and change filters on schedule. Our guide to water in diesel tanks explains how water gets in and what to do when you find it.

Plan reorders for the whole season

Irrigation demand often peaks at the same time across a whole area, which is also when distributors are busiest. Talk to your supplier before the season about how often they can reach your wells and how much notice they need for a fill.

Some distributors offer scheduled fills or keep-full service for farm tanks. Ask whether they will run a regular route past your wells, and keep a simple log of gallons and engine hours so you can spot a tank burning faster than normal.

Questions

Can irrigation engines run on dyed diesel?

Many farms use dyed diesel in irrigation engines that never travel on public roads. Whether your use qualifies, and what paperwork your state may require, is set by the IRS and your state tax agency, so check with them if you are unsure.

Will a distributor deliver to tanks out in the field?

Many farm fuel distributors do, but access matters. Share a map pin for each tank, describe the road to it, and say whether it gets muddy. Ask whether they can send a smaller truck for tight or soft field roads.

Does Bulk Fueling list farm diesel prices?

No. Bulk Fueling is a free directory and does not publish fuel prices. Search the ZIP where your wells are, filter for dyed diesel, and request quotes from the distributors that serve your area.