Skip to content
Bulk Fueling

How to keep stored diesel from gelling this winter

Diesel naturally contains wax. When the fuel gets cold enough, that wax forms crystals that can clog filters and lines, and in a hard freeze the fuel can thicken until equipment will not start. A little planning with your distributor before the cold arrives avoids most of it.

Frost-covered steel aboveground diesel tank with a fuel pump, hose and nozzle at a snowy equipment yard on a cold morning

What gelling actually is

The cloud point is the temperature where wax crystals first show up in the fuel, making it look hazy. As the fuel keeps cooling, those crystals grow and link together, and they start to catch in filters and narrow lines.

Fuel suppliers also talk about the cold filter plugging point and the pour point, which describe how cold the fuel can get before it plugs a test filter or stops flowing. Ask your distributor what their winter product is designed to handle.

Get the right fuel in before the cold

Many distributors adjust their diesel for the season, often by blending in No. 1 diesel or adding cold-flow additives. What they sell depends on the local climate, so tell them where the tank sits and how cold it gets.

Timing matters. Summer fuel left in a tank can still be there when the first hard freeze hits. Ask when the distributor switches to winter product, and try to run the tank down so the next fill carries the winter fuel.

Additives work before wax forms

Cold-flow additives change how wax crystals form so the fuel keeps moving through filters. Additive makers and fuel industry guides say they need to be mixed in while the fuel is still well above its cloud point.

Additives and No. 1 diesel do not blend well into fuel that is already cloudy or gelled. Follow the product label, and ask your distributor whether they treat the fuel at the terminal or recommend treating it in your tank.

Keep water out of the tank

Water at the bottom of a tank can freeze, and ice crystals plug filters just like wax. Check for water before winter, drain it off, and replace filters that are already dirty, since dirty filters plug faster in the cold.

Aboveground tanks and exposed lines cool faster than buried ones. Some sites shelter the tank from wind, insulate lines, or add heat tracing. A fuel equipment contractor can tell you what makes sense for your setup.

If the fuel has already gelled

Do not keep cranking an engine with gelled fuel. The fuel usually has to warm back up before anything will flow, which can mean moving equipment into a heated space or waiting for warmer temperatures.

For a stored tank, call your distributor or a fuel service company. Ask about after-hours or emergency service before the cold week arrives, so you know who to call if a tank gels on a morning when trucks must roll.

Questions

Does dyed diesel gel too?

Yes. Dyed diesel is the same basic fuel as clear diesel with dye added, and it can gel in the cold just the same. Ask about the winter product for every diesel tank on the site, including off-road tanks.

Do biodiesel blends gel sooner?

Biodiesel can change how a blend behaves in the cold, depending on the blend level and the feedstock. Ask your distributor what blend they deliver in winter and whether it suits the coldest weather at your site.

Can Bulk Fueling tell me which winter blend to buy?

No. Bulk Fueling is a free directory and does not set fuel specs or publish prices. Search your site ZIP, then ask the distributors that serve you what winter fuel they deliver and when they switch.